en
Cleaning and maintenance
8
Removing and installing the filter
The filter must be serviced regularly in order to
guarantee efficient filtration of odours and grease.
Metal grease filter
The metal grease filters must be cleaned every
20
operating hours or at least every 2
weeks.
:
Warning – Risk of fire!
Fatty deposits in the grease filter may catch fire.
Clean the grease filter at least every 2
weeks.
Never operate the appliance without a grease filter.
Removing metal grease filter
1.
Push the lock and then push the metal grease filter
back and pull it down.
While doing this, place your other hand under the
metal grease filter.
Note:
To avoid causing damage, do not bend the
metal grease filter.
2.
Take the metal grease filter out of the holder.
Note:
Grease may accumulate in the bottom of the
metal grease filter. Hold the metal grease filter level
to prevent grease from dripping out.
3.
After removing the metal grease filters, clean the
inside of the appliance.
4.
Clean the metal grease filters and let them dry
before re-fitting them.
Cleaning the metal grease filter
Notes
■
Do not use any aggressive, acidic or alkaline
cleaning agents.
■
When cleaning the metal mesh grease filters, also
clean the holder for the metal mesh grease filters in
the appliance using a damp cloth.
■
The metal mesh grease filters can be cleaned in the
dishwasher or by hand.
By hand:
Note:
You can use a special grease solvent for
stubborn dirt. It can be ordered via the Online Shop.
■
Soak the metal mesh grease filters in a hot soapy
solution.
■
Clean the filters with a brush and then rinse them
thoroughly.
■
Leave the metal mesh grease filters to drain.
In the dishwasher:
Note:
If the metal mesh grease filters are cleaned in the
dishwasher, slight discolouration may occur. This has
no effect on the function of the metal mesh grease
filters.
■
Do not clean heavily soiled metal mesh grease filters
together with utensils.
■
Place the metal mesh grease filters loosely in the
dishwasher. The metal mesh grease filters must not
be wedged in.
Installing the metal mesh grease filter
1.
Insert the metal grease filters with the lock to the
front.
Insert the metal grease filters on the underside of the
appliance.
2.
Swing the metal grease filters inwards, locking them
in place.
Changing the active carbon filter (only in circulating-
air mode)
To ensure effective odour removal, the filters must be
serviced regularly.
The active carbon filters must be replaced at least every
4
months.
Note:
The active carbon filters cannot be cleaned or
reactivated.
1.
Remove metal mesh grease filter, see above.
2.
Turn the old active carbon filter and pull away from
the bracket.
¨
3.
Push the new active carbon filter onto the bracket
and turn.
©
4.
Fit the metal mesh grease filter.
%
$
