en
Installation instructions
14
7.
Mark the holes for the appliance bracket.
8.
Drill the holes.
9.
Insert the wall plugs flush with the wall.
10.
Screw on the angle bracket for the flue duct.
11.
Screw in the screws for the appliance bracket
loosely; do not tighten them fully.
Preparing the appliance
1.
Open the filter cover if required.
2.
Remove the grease filters.
To avoid causing damage, do not bend the grease
filters.
Installing the appliance
WARNING ‒ Risk of injury!
Components inside the appliance may have sharp
edges.
▶
Wear protective gloves.
1.
Hook on the appliance.
2.
Align the appliance horizontally using screws.
3.
Fit the grease filters.
To avoid causing damage, do not bend the grease
filters.
Establishing the exhaust air connection with an
exhaust air pipe, 150 mm diameter
1.
Secure the exhaust pipe to the air pipe connector.
2.
Establish the connection to the exhaust air opening.
3.
Seal the joints.
Establishing the exhaust air connection with an
exhaust air pipe, 120 mm diameter
1.
Secure the reducing connector to the air-pipe con-
nector.
2.
Secure the exhaust pipe to the air pipe connector.
3.
Establish the connection to the exhaust air opening.
4.
Seal the joints.
Connecting to the power supply
1.
Insert the mains plug into the protective contact
socket.
2.
If a fixed connection is required, follow the instruc-
tions in the section
→
"Instructions for the electrical connection",
Fitting the flue duct
WARNING ‒ Risk of injury!
Components inside the appliance may have sharp
edges.
▶
Wear protective gloves.
1.
Remove the protective foil from both flue duct sec-
tions.
