background image

en

    Operating the appliance

6

1

Operating the appliance

Operating the appliance

These instructions apply to several appliance variants. 

It is possible that individual features are described 

which do not apply to your appliance.

Note: 

Switch on the extractor hood when you start 

cooking and switch it off again several minutes after you 

have finished cooking. This is the most effective way of 

removing the kitchen fumes.

Control panel model 1

Setting the fan

Switching on

Touch the 

#

 symbol.

The fan will start at fan setting 2.

Selecting a fan setting

Select the fan setting.

Switching off

Touch the 

#

 symbol.

Intensive setting

You can use the intensive setting if there is a large 

build-up of odours and fumes/vapours.

Switching on

Touch the 

C

 or 

D

 symbol.

Note: 

After approx. 6 minutes, the extractor hood 

automatically switches back to fan setting 3.

Switching off

If you want to end intensive mode before the preset 

time expires, touch the symbol for the required fan 

setting.

Intermediate position for the glass front

On some appliances, the glass front can be adjusted to 

an intermediate position. The intermediate position can 

be used for eliminating particularly strong cooking 

smells and large amounts of steam. 
Take hold of the glass front in the centre and open it 

carefully.

Fan run-on time

Switching on

Touch the 

y

 symbol.

The fan will run at fan setting 1.
After approximately 10 minutes, the fan will switch itself 

off automatically.

Switching off

Touch the 

y

 symbol.

This immediately stops fan run-on.

Automatic mode

Switching on

1.

Touch the 

#

 symbol.

The fan will start at setting 2.

2.

Touch the 

>

 symbol.

The optimum fan setting is set automatically using 

the PerfectAir sensor.

Switching off

Touch 

#

 or any fan setting to switch off automatic 

mode.
The fan switches itself off automatically if the PerfectAir 

sensor detects no further change in the air quality in the 

room.
Automatic mode can run for a maximum of 4 hours.

Symbol

Explanation

#

Fan on/off

1-3

Fan settings

C

Intensive mode 1

D

Intensive mode 2

y

Fan run-on

>

Automatic mode

#

Metal grease filter/activated charcoal filter saturation 

indicator

D

Home Connect

B

Light on/off/dimming

Summary of Contents for DWB98JR50A

























Reviews: