background image

Cleaning and servicing

 en

7

You can obtain stainless steel cleaning products
from the after-sales service or the online shop.

7.2 Cleaning products

You can obtain suitable cleaning products from after-
sales service or the online shop.

WARNING ‒ Risk of electric shock!

An ingress of moisture can cause an electric shock.

Before cleaning, pull out the mains plug or switch
off the fuse in the fuse box.

Do not use steam- or high-pressure cleaners to
clean the appliance.

WARNING ‒ Risk of burns!

The appliance becomes hot during operation.

Allow the appliance to cool down before cleaning.

ATTENTION!

Unsuitable cleaning products may damage the sur-
faces of the appliance.

Do not use harsh or abrasive detergents.

Do not use cleaning products with a high alcohol
content.

Do not use hard scouring pads or cleaning
sponges.

Only use glass cleaners, glass scrapers or stainless
steel care products if recommended in the cleaning
instructions for the relevant part.

Wash sponge cloths thoroughly before use.

7.3 Cleaning controls

WARNING ‒ Risk of electric shock!

Penetrating moisture may cause an electric shock.

Do not use wet sponge cloths.

1.

Observe the information regarding the cleaning
agents. 
→ 

"Cleaning products", Page 7

2.

Clean using a damp sponge cloth and hot soapy
water.

3.

Dry with a soft cloth.

7.4 Removing the grease filter

1. ATTENTION!

Falling grease filters may damage the hob below.

Grip below the grease filter with one hand.

Open the lock on the grease filter and fold down the
grease filter.

2.

Remove the grease filters from the holders.

To prevent grease from dripping, hold the grease fil-
ter horizontally.

7.5 Cleaning grease filters manually

The grease filters filter the grease from the cooking va-
pour. Regularly cleaned grease filters guarantee a high
level of grease removal. We recommend cleaning the
grease filters every two months.

WARNING ‒ Risk of fire!

Fatty deposits in the grease filters may catch fire.

Clean the grease filters regularly.

Requirement:

 The grease filters have been removed.

1.

Observe the information regarding the cleaning
agents. 
→ 

"Cleaning products", Page 7

2.

Soak the grease filter in hot soapy water.
Use special grease solvent for stubborn dirt. You
can obtain grease solvents from customer service
or the online shop.

3.

Use a brush to clean the grease filters.

4.

Rinse the grease filters thoroughly.

5.

Allow the grease filters to drain.

7.6 Cleaning grease filters in the
dishwasher

The grease filters filter the grease from the cooking va-
pour. Regularly cleaned grease filters guarantee a high
level of grease removal. We recommend cleaning the
grease filters every two months.

WARNING ‒ Risk of fire!

Fatty deposits in the grease filters may catch fire.

Clean the grease filters regularly.

ATTENTION!

The grease filters may become damaged if they are
squeezed.

Do not squeeze the grease filters.

Note: 

When cleaning the grease filter in the dish-

washer, light discolouration may occur. This discoloura-
tion has no effect on the performance of the metal
grease filters.

Requirement:

 The grease filters have been removed.

1.

Observe the information regarding the cleaning
agents. 
→ 

"Cleaning products", Page 7

2.

Place the grease filters loosely into the dishwasher.
Do not clean heavily soiled grease filters with
utensils.
Use special grease solvent for stubborn dirt. You
can obtain grease solvents from after-sales service
or the online shop.

3.

Start the dishwasher.
Select a temperature of no more than 70 °C.

4.

Allow the grease filters to drain.

Summary of Contents for DWA6 Series





















Reviews: