Digital Video Recorder 440/480 Series
Archive Player | en
85
Bosch Security Systems
Installation and Operation manual
AM18-Q0605 | v2.0 | 2012.04
8.5.1
Capturing a still image
Capture still images from the full screen display of a camera and save them to the PC hard
disk in a bitmap format.
To save an image from the active cameo to the PC hard disk:
1.
Click the
Capture
button;
–
The Snapshot pop-up window appears.
2.
To change the default location, browse to the location in the PC file system where the
image file is to be stored.
3.
Type a new name for the file to change the file name.
4.
Click
Save
.
Authentication information is shown under the image.
8.6
Find image
Figure 8.4
Archive Player - date and time fields and Go button
1.
Fill in a date and time.
2.
Click the
Go
button;
–
Playback starts at the specified date and time.
8.7
Video slider bar
The video slider bar shows the relative playback time within the video interval and allows its
adjustment.
8.8
Checking authenticity
1. Click the
Check
button to verify the authenticity of the archive:
–
A progress bar will be displayed if the check takes some time.
–
An information window indicates the authenticity of the archive.
Verifying individual frames
For authenticity verification of individual frames, pause playback and then click the
information
button. This opens the Authenticity information window. This window shows
details of the video frame shown in the cameo when it was clicked.
8.9
Exit button
Click the
Exit
button to stop using the Archive Player.
