RAID Subsystem DVA-08E, -08K, -16K
Connecting a Digital Video Recorder | en
95
Bosch Sicherheitssysteme GmbH
Quick Installation Guide
F.01U.027.800 | V5 | 2010.06
To configure a VIDOS NVR:
1.
Click the Windows
Start
button, and then click
Control Panel
.
2.
In Control panel, double-click
Administrative Tools
.
3.
In Administrative Tools, double-click
Computer Management
.
4.
In Computer Management, click
Disk Management
.
If the subsystem is properly connected, the Disk Manager starts the
Initialize and
Convert Disk Wizard
.
5.
Click
Next
to open the following dialog box.
6.
Select the appropriate check boxes of the disks you want to initialize, and then click
Next
to open the next dialog box.
NOTICE!
Before you proceed make sure that the VIDOS NVR service is stopped or has not been
installed. For installing a VIDOS NVR and assigning drives, refer to your VIDOS NVR manual.
The drive letter can only be assigned upon the first installation of the VIDOS NVR. The VIDOS
NVR setup must rerun if the drive letter has changed.
