manualshive.com logo in svg

Bosch DSDA ISCSI DISK ARRAY SERIES DSA-N2B20, Installation Manual

Share
Download
Bosch DSDA ISCSI DISK ARRAY SERIES DSA-N2B20 Installation Manual Download Page 18

16

en | Configuration through the Web Interface

DSDA iSCSI Disk Array Series

V 1 | 2008.08

Installation Guide

Bosch Security Systems

47. On the 

Add Initiator Groups

 screen, click 

Next

.

48.

LUN ID

: Leave this field blank. The lowest available ID will be used automatically. 

Click 

Next

.

49. The changes are summarized on the 

LUN Wizard: Commit Changes 

screen. 

Click 

Commit

 to create the LUN.

If the LUN has been created successfully, a 

Success!

 screen will display.

50. Use the 

LUN Wizard

 to create all 16 (or the desired number of) LUNs. 

The system configuration is now done.

51. It is recommended to change the password for the Web interface access.

In the navigation panel, select 

Security

 > 

Change Password

.

52. If no further storage is to be added, disconnect your computer from the storage system.

Connect the storage system to the CCTV network by plugging the network cable (not 

supplied) into the network port, labeled 

e0a

.

Summary of Contents for DSDA ISCSI DISK ARRAY SERIES DSA-N2B20









































Reviews:

No comments

Brands by name

Popular brands

Load more brands