Bosch Drive System, Owner'S Manual

Page: 31 / 33

English– 31
Bosch eBike Systems 0 276 001 USPen | (1.9.14)
540 Temperature error The eBike is outside of the permissible temperature range. Switch
off the eBike system and allow the drive unit to either cool down or
heat up to the permissible temperature. Restart the system. If the
problem persists, contact your Bosch eBike dealer.
550
An improper load was detected.
Remove the load. Restart the system. If the problem persists, con-
tact your Bosch eBike dealer.
602 Internal battery pack error while charging Unplug the charger from the battery pack. Restart the eBike sys-
tem. Plug the charger into the battery pack. If the problem persists,
contact your Bosch eBike dealer.
602 Internal battery pack error Restart the system. If the problem persists, contact your Bosch
eBike dealer.
603 Internal battery pack error Restart the system. If the problem persists, contact your Bosch
eBike dealer.
605 Battery pack temperature error The eBike is outside of the permissible temperature range. Switch
off the eBike system and allow the drive unit to either cool down or
heat up to the permissible temperature. Restart the system. If the
problem persists, contact your Bosch eBike dealer.
605 Battery pack temperature error while
charging
Unplug the charger from the battery pack. Allow the battery pack to
cool. If the problem persists, contact your Bosch eBike dealer.
606 External battery pack error Check the wiring. Restart the system. If the problem persists, con-
tact your Bosch eBike dealer.
610 Battery pack voltage error Restart the system. If the problem persists, contact your Bosch
eBike dealer.
620 Charging error Replace the charger. Contact your Bosch eBike dealer.
640 Internal battery pack error Restart the system. If the problem persists, contact your Bosch
eBike dealer.
655 Multiple battery pack errors Switch off the eBike system. Remove the battery pack and reinsert
it. Restart the system. If the problem persists, contact your Bosch
eBike dealer.
656 Software version error Contact your Bosch eBike dealer so that he can perform a software
update.
No
display
Internal error in the on-board computer Restart your eBike system by switching it off and back on.
Code Cause Corrective Action