Safety Instructions
1–2
1070 066 028-101 (01.05) GB
1.2
Qualified personnel
The requirements as to qualified personnel depend on the qualification pro-
files described by ZVEI (Zentralverband Elektrotechnik und Elektronikin-
dustrie – German Electrical and Electronic Manufacturers’ Association) and
the VDMA (Verband deutscher Maschinen- und Anlagenbau – German En-
gineering Federation) in:
Weiterbildung in der Automatisierungstechnik
edited by: ZVEI and VDMA
MaschinenbauVerlag
Postfach 71 08 64
60498 Frankfurt/Germany
The present manual is designed for drive technicians. They need special
knowledge on commissioning and optimization.
Programming, start and operation as well as the modification of program
parameters is reserved to properly trained personnel! This personnel must
be able to judge potential hazards arising from programming, program
changes and in general from the mechanical, electrical, or electronic equip-
ment.
Interventions in the hardware and software of our products, unless de-
scribed otherwise in this manual, are reserved to our specialized personnel.
Tampering with the hardware or software, ignoring warning signs attached to
the components, or non-compliance with the warning notes given in this
manual may result in serious bodily injury or material damage.
Only electrotechnicians as recognized under IEV 826-09-01 (modified) who
are familiar with the contents of this manual may install and service the prod-
ucts described.
Such personnel are
D
those who, being well trained and experienced in their field and familiar
with the relevant norms, are able to analyze the jobs being carried out
and recognize any hazards which may have arisen.
D
those who have acquired the same amount of expert knowledge through
years of experience that would normally be acquired through formal tech-
nical training.
With regard to the foregoing, please note our comprehensive range of train-
ing courses. Our training center will be pleased to provide you with further
information,
telephone: (+49) 6062 78-258.
