en
Trouble shooting
18
In the dishwasher:
Note:
If the metal mesh grease filters are cleaned in the
dishwasher, slight discolouration may occur. This has
no effect on the function of the metal mesh grease
filters.
■
Do not clean heavily soiled metal mesh grease filters
together with utensils.
■
Place the metal mesh grease filters loosely in the
dishwasher. The metal mesh grease filters must not
be wedged in.
Installing the metal mesh grease filter
1.
Insert metal grease filter.
2.
Fold up metal grease filter and engage the lock.
Note:
Make sure that the filter lock engages properly.
Activated charcoal filter (only in circulating-air mode)
To ensure effective odour removal, the filter must be
serviced regularly.
The activated charcoal filters must be replaced at least
every 3 months.
Notes
■
The activated charcoal filters are not included with
the appliance.The activated charcoal filters are
available from specialist retailers, from our after-
sales service or from our online shop.
■
The activated charcoal filters cannot be cleaned or
reactivated.
■
Only use genuine replacement filters. This will
ensure that the appliance performs optimally.
Removing the activated charcoal filter (only in
circulating-air mode)
Activated charcoal filters trap the odour-causing
compounds in cooking smells. They are only used for
circulating-air mode.
1.
Remove the metal grease filter.
2.
Remove the grille and metal grease filter.
Fitting the activated charcoal filter
1.
Place the activated charcoal filter onto the metal
grease filter.
2.
Fix the activated charcoal filter to the grille.
3
Trouble shooting
Trouble shooting
Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
:
Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the
appliance is defective, unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.
Fault table
--------
Problem
Possible cause Solution
The appliance
does not work
The plug is not
plugged into the
mains
Connect the appliance to the
power supply
Power cut
Check whether other kitchen
appliances are working
The fuse is faulty Check in the fuse box to make
sure that the fuse for the appli-
ance is in working order
The lighting does
not work.
The LED lights
are defective.
You can read about this in the
section entitled "Replacing the
LED lights".
