Web Client Software
The Web Client software (loaded on a PC) gives full remote control of the DIVAR over the web.
Up to four remote users can access and control the unit. Remote live viewing, search,
playback, and system configuration are provided. Remote control functions include pan/tilt/
zoom control of cameras, and video archiving. An on-line status overview of the connected unit
is also provided.
To access a unit, a user must log on using the same User ID and Password used for local
access. The Web Client will follow the permissions of the user account, restricting the
functions available to each remote user; for example, the ability to archive video. See
Operating instructions for more details on User Levels.
The recommended PC requirements for running Web Client are:
–
Operating platform: A PC running Windows XP, Windows Vista, or Windows 7.
–
Processor: Intel Core Duo, 2.0 GHz or comparable
–
RAM memory: 2048 MB
–
Free hard disk space: 10 MB
–
Graphics card: NVIDIA GeForce 8600 or higher
–
Network interface: 10/100-BaseT
–
Web Browser: The current product series supports Internet Explorer, Firefox, and Google
Chrome (QuickTime required; no playback supported).
Getting started
To use the Web Client, first connect your PC and the DIVAR via a TCP/IP network connection
and load a new Web Client version as follows:
1.
In the DIVAR, go to the network setup (stored in Main menu > Setting > Network) and
check that the network settings are correct. You can also see here the IP address for the
DIVAR. Make a note of the IP address for the next step.
2.
On your PC start the Windows Command prompt: click Start > type "cmd" in the search
field. Type "ping ***.***.***.***" (***= IP address) to check the connection. The return TTL
value should be less than 255.
3.
Open an internet browser on your PC and input the IP address for the DIVAR in the
address column. For example, if the address is 10.10.3.16, then input http:// 10.10.3.16
in the IE address column. See following example.
4.
The browser will ask to download and run the latest Web Client webplugin.exe (or
overwrite the previous version). Always check first with your system administrator that
you have sufficient rights to install the web client software on your PC (the web client
executables will be loaded into the directory Program Files (x86) \ webrec).
5.
Follow the dialog boxes to correctly install the Web Client. Once installed, the screen will
refresh and show the login screen.
Note: The Web Client does not install ‘webrec’ on a PC again unless a new version is released
with new firmware.
11
11.1
DIVAR 2000 / DIVAR 3000 / DIVAR
5000
Web Client Software | en
77
Bosch Security Systems
Operation Manual
2016.09 | v1.0 | AM18-Q0717
Summary of Contents for DIVAR 2000
Page 1: ...DIVAR 2000 DIVAR 3000 DIVAR 5000 Network Hybrid Video Recorder en Operation Manual ...
Page 2: ......
Page 93: ......
