Bosch DIP-2040EZ-00N, Installation Manual

Page: 28 / 40

IP>/dlacockpit
, then press ENTER. DIVAR IP 2000
Dashboard displays the message that you must open
Configuration > Disk management for configuration.
6. Click Configuration to open the configuration.
7. Expand System, then click Disk management.
8. To add the storage capacity of the hard disks to the system,
follow the instructions that are displayed.
9. After finishing the hard disk setup the individual disk status
LED to the right of the disk carrier will turn blue.
See also:
–
Chassis setup, page 16
Updating the system
Following procedure describes how to update the system
manually.
To update DIVAR IP manually:
1.
In DIVAR IP Dashboard, click Device monitor in the tree
structure.
2. Click Update manually.
A dialog box is displayed where you can browse for the
update file.
Notice!
If your system is connected to the internet, the system is
automatically checking for updates. If an update is available,
you can download and install it directly. If your system is not
connected to the internet, you can manually download the
latest update package from the product pages. Updating your
system includes all components as well as camera devices.
Updating will take about 5 - 10 minutes and recodings are
stopped during the update process.
8.5
28 en | Maintaining the system DIVAR IP 2000
2014.07 | V1 | DOC Bosch Sicherheitssysteme GmbH