Bosch DIP-2040-00N Quick Installation Manual Download Page 4

Safety precautions

Observe the safety precautions in this chapter.
 

General safety precautions

Follow these rules to ensure general safety:

Keep the area around the system clean and free of clutter.

Place the chassis top cover and any system components
that have been removed away from the system or on a table
so that they won't accidentally be stepped on.

While working on the system, do not wear loose clothing
such as neckties and unbuttoned shirt sleeves, which can
come into contact with electrical circuits or be pulled into a
cooling fan.

Remove any jewelry or metal objects from your body, which
are excellent metal conductors that can create short
circuits and harm you if they come into contact with printed
circuit boards or areas where power is present.

!

Warning!
Interruption of mains supply:
Voltage is applied as soon as the mains plug is inserted into the
mains socket.
However, for devices with a mains switch, the device is only
ready for operation when the mains switch (ON/OFF) is in the
ON position. When the mains plug is pulled out of the socket,
the supply of power to the device is completely interrupted.

1

1.1

4

en | Safety precautions

DIVAR IP 2000

2013.09 | V4 | DOC

Bosch Sicherheitssysteme GmbH

Summary of Contents for DIP-2040-00N









































Reviews: