Dinion and FlexiDome analog camera family
|
17
Bilinx is a major time and labor saver, especially when
cameras are difficult to reach for hands-on servicing or
in environments where you cannot interrupt surveillance.
It reduces the number of steps needed in various
installation and service situations.
Remote camera control over the video cable
Bilinx allows you to control any Dinion analog camera
– including their FlexiDome counterparts – over the video
cable. Embedded in the video signal, this innovative
Bosch technology allows you to check camera status,
change settings and update firmware from your laptop.
It also supports transmission of camera-generated
Video Motion Detection, along with signals from
connected external sources such as door contacts.
Bilinx
– the smartest way
to reach your camera
Stay in control
Bilinx does not require any additional or special wiring;
you can use standard coax or passive UTP video cable.
Simply attach the Bilinx dongle to the camera, link to your
PC or laptop, and you can:
Control PTZ including preset positions
Adjust camera and dome configuration settings
Cut and paste settings to multiple cameras
Receive alarm signals and motion detection
Benefits at a glance:
Reduce installation and maintenance costs
Plug&Play – no need to address each camera
Upgrade existing single cable installations easily
Update camera firmware remotely
Remote set-up
