background image

Dinion Day/Night Camera

Safety | en

7

Bosch Security Systems

Installation and Operation manual

F.01U.163.823 | v1.0 | 2010.01

1.3

Important notices

Disposal -

 Your Bosch product was developed and 

manufactured with high-quality material and components that 
can be recycled and reused. This symbol means that 
electronic and electrical appliances, which have reached the 
end of their working life, must be collected and disposed of 
separately from household waste material. Separate collecting 
systems are usually in place for disused electronic and 
electrical products. Please dispose of these units at an 
environmentally compatible recycling facility, per 

European 

Directive 2002/96/EC

WARNING! 

Power disconnect for high voltage versions: A unit has power 
supplied whenever the power cord is inserted into the power 
source. The power cord plug is the main power disconnect for 
the unit. For pluggable equipment, install the socket outlet near 
the equipment so it is easily accessible.

WARNING! 

All-pole power switch: Incorporate an all-pole power switch, 
with a contact separation of at least 3 mm in each pole, into the 
electrical installation of the building.

CAUTION! 

Fuse rating: The branch circuit protection must be secured with 
a maximum fuse rating of 16 A. This must be in accordance with 

NEC800 (CEC Section 60)

.

CAUTION! 

The Low Voltage power supply unit must comply with EN/UL 
60950. The power supply must be a SELV-LPS unit or a SELV - 
Class 2 unit (Safety Extra Low Voltage - Limited Power Source). 

Summary of Contents for Dinion LTC0465









































Reviews: