DINION imager 9000 HD
Camera Set-up | en
31
1. To rotate the image 180°, press and hold the
Menu
button
until the image flips.
2. Briefly press the
Menu
button to open the automatic
motorized focus adjustment screen.
3. Briefly press the
Menu
button to set the focus and zoom
defaults.
–
The progress is shown on the monitor.
–
When the initial focus adjustment is finished, position
the camera using the pan and tilt adjustments.
4. Briefly press the
Menu
button to start the automatic
motorized focus adjustment.
5. Briefly press the
Menu
button again and again to scroll
through the seven preset zoom positions.
–
The selection moves back when the last position is
reached.
6. When you reach the desired zoom position, use a long
press of the
Menu
button to set the zoom position and to
re-focus.
7. If the camera is not correctly focussed, press the
Menu
button for a longer time to restart the wizard.
If the camera is correctly focussed, press the
Menu
button
for a short time to change the analog output.
8. Briefly press the
Menu
button again and again to select
NTSC
or
PAL
with the appropriate aspect ratio for your
display, or to swich the analog output
OFF
(default).
9. When the selection is made, use a long press of the
Menu
button to save the results.
–
The zoom and focus position is stored.
–
The iris is set to its original value.
–
The video service output is disabled.
–
The BNC video output is set to its selected state.
Note:
The wizard automatically disappears if not used for a whle.
Bosch Security Systems
Installation manual
AM18-Q0663 | 1.0 | 2013.09
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
