manualshive.com logo in svg

Bosch DINION 5000, Installation Manual

The Bosch DINION 5000 is a cutting-edge surveillance camera offering top-of-the-line security features and high-quality visuals. To assist with its seamless installation and operation, you can easily obtain the comprehensive Installation Manual from manualshive.com, where it is available for free download in user-friendly PDF format.

Share
Download
background image

DINION capture 5000/7000

Installing the DINION capture | en

27

Bosch Security Systems, Inc.

Installation Manual

 | 1.0 | 2012.01

To disable Automatic Mode Switching:

1.

Navigate to the Install menu for the license plate camera. 

Refer to 

Section 4.1 Menus, page 28

.

2.

Navigate to the Alarm I/O menu.

3.

Select None for the Input Action option. Refer to 

Section 4.6.3 Alarm I/O submenu, page 47

.

NOTICE! 

Shutter can also be changed to adjust plate brightness. Shutter 

is fixed at 1/5000 from the factory and should be changed only 

by an experienced user. Changing the shutter speed affects 

maximum capture speed of the vehicle and ambient rejection 

ability.

Summary of Contents for DINION 5000

























































Reviews:

No comments

Related manuals for DINION 5000

Panasonic aw-he40 series Operating Instruction preview
aw-he40 series
Brand: Panasonic Pages: 138
jacarta SP8 Test Manual preview
SP8
Brand: jacarta Pages: 4
FältCom ECII Flex User Manual preview
ECII Flex
Brand: FältCom Pages: 40
M86 Security HL Installation Manual preview
HL
Brand: M86 Security Pages: 96
Velleman CAMCOLD27 User Manual preview
CAMCOLD27
Brand: Velleman Pages: 20
Eurotops 48764 Manual preview
48764
Brand: Eurotops Pages: 12
hager TCC521E User Instructions preview
TCC521E
Brand: hager Pages: 4
LaView LV-PB784F2 User Manual preview
LV-PB784F2
Brand: LaView Pages: 26
Somogyi home HSB 120 R Instruction Manual preview
home HSB 120 R
Brand: Somogyi Pages: 25
R&TTE LRX 2035 Quick Start Manual preview
LRX 2035
Brand: R&TTE Pages: 6
Dante DLM1771 Installation And Operation Manual preview
DLM1771
Brand: Dante Pages: 40
D-MAX DCC-700d Series Manual preview
DCC-700d Series
Brand: D-MAX Pages: 24
Axis Q6000-E Installation Manual preview
Q6000-E
Brand: Axis Pages: 30
Abus IPCB72501 Installation Manual preview
IPCB72501
Brand: Abus Pages: 18
3xLogic VX-4V-ID-RIAWD Quick Start Manual preview
VX-4V-ID-RIAWD
Brand: 3xLogic Pages: 17
Feig Electronic MWD BP Manual preview
MWD BP
Brand: Feig Electronic Pages: 97
urmet domus 1096/406 Quick Manual preview
1096/406
Brand: urmet domus Pages: 24
IVIEW CZ-50X User Manual preview
CZ-50X
Brand: IVIEW Pages: 29

Brands by name

Popular brands

Load more brands