22
en | Installing the DINION capture
DINION capture 5000/7000
| 1.0 | 2012.01
Installation Manual
Bosch Security Systems, Inc.
NOTICE!
For purposes of evaluation and testing of the mounting
bracket's integrity under static loading at CSA, the unit was
mounted to a drywall surface as per the procedures below:
–
Locate a stud in the wall and mark the outside edges of the
stud.
–
Using the wall mount bracket as a template, align the
mounting hole with the center of the stud.
–
Mark the point on the wall in the center of the hole where
the mounting bolt will be positioned.
–
Remove the wall mount bracket and drill a pilot hole at the
marked point.
–
Align the wall mount bracket mounting hole with the hole
drilled in the wall.
–
Using a screwdriver, secure the wall mount bracket by
screwing a 2.5 in. screw with washer securely into the
stud.
–
Follow this procedure to attach the three remaining
screws.
NOTICE!
The camera has not been evaluated for safety requirements
using other mounting kits.
