13
Before installation
If the instructions for installation for the
gas hob specify a greater distance, this must
be adhered to.
Additional information for gas coo-
king appliances:
Comply with the currently valid instal-
lation regulations and the installation
instructions supplied by the gas appliance
manufacturers.
The extractor hood may be installed with
only one side next to a high-sided unitor a
high wall. Min. gap 50 mm.
The extractor hood must be installed at
a minimum distance of
650 mm above
gas hotplates
– Fig. 5 – provided the
fol-lowing nominal heat loads (Hs) are
notexceeded:
❑
Gas cookers
Load of one hotplate max. 03.0 kW
Load of all hotplates max. 08.3 kW
Load of oven max. 03.9 kW
❑
Gas hobs
Load of one hotplate max. 03.9 kW
Load of all hotplates max. 11.3 kW
❑
Gas ceramic hob
The specifications for nominal heat load
do not apply to closed gas ceramich obs.
Always comply with the specifications of
the hotplate manufacturer.
The smaller the distance between the
extractor hood and hotplates, the greater
the likelihood that rising water vapour will
condense under the extractor hood.
The extractor hood may only be installed
over a fireplace which burns solidfuel
(fire hazard due to flying sparks) if the
fireplace has a
closed, non-detachable
cover
and national regulations have been
observed. This restriction does not apply
to gas cookers and gas hobs.
Important information
Old appliances are not worthless rubbish.
Valuable raw materials can be reclaimed by
recycling old appliances.
Before disposing of your old appliance, ren-
der it unusable.
This appliance is marked according to the
European directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the environment
and human health, which could otherwise be
caused by inappropriate waste handling of
this product.
The symbol on the product, or on the
documents accompanying the product, indi-
cates that this appliance may not be treated
as household waste. Instead it should be
taken to the appropriate collection point
for the recycling of electrical and electronic
equipment. Disposal must be carried out in
accordance with local environmental regula-
tions for waste disposal.
For more detailed information about treat-
ment, recovery and recycling of this product,
please contact your local council, your hou-
sehold waste disposal service or the shop
where you purchased the product.
You received your new appliance in a
protective shipping carton.
All packaging materials are environmentally
friendly and recyclable.
Please contribute to a better environment
by disposing of packaging materials in an
environmentally-friendly manner.
Please ask your dealer or inquire at your
local authority about current means of
disposal.
The extractor hood can be used in
exhaust air or circulating air mode.
Always mount the extractor hood over the
centre of the hob.
The minimum distance between the
supporting surface for the cooking vessels
on the hob and the lowest part of the range
hood must be not less than 50cm from
electric cookers and 65cm from gas or mixed
cookers. Fig. 1
Installation Instructions
