background image

4

Before using your appliance for the first
time, please read these Instructions for
Use carefully. They contain important
information concerning your personal
safety as well as on use and care of the
appliance.

Please retain the operating and
installation instructions for a subsequent
owner.

Overheated fat or oil can easily catch

fire. If you are cooking with fat or oil, e.g.
chips, etc., never leave the cooker
unattended.

Do not flambé food directly under the

extractor hood.

Risk of grease filter catching fire due to
flames.

The hotplates must always be covered

with a utensil.

Restrictions apply to the use of the

extractor hood over a solid-fuel burner
(coal, wood, etc.). (See Installation
instructions).

Gas hobs / Gas cookers

Do not use all the gas hotplates

simultaneously for a prolonged period
(max. 15 minutes) at maximum thermal
load, otherwise there is a risk of burns if the
housing surfaces are touched or a risk of
damage to the extractor hood. 

If the extractor hood is situated over a gas
hob, operate the hood at maximum setting
if three or more gas hotplates are operated
simultaneously.

Important notes:

The Instructions for Use apply to several
versions of this appliance. Accordingly,
you may find descriptions of individual
features that do not apply to your
specific appliance.

This extractor hood complies with all
relevant safety regulations.

Repairs should be carried out by
qualified technicians only.

Improper repairs may put the user at
considerable risk.

Do not use the appliance if damaged.

The appliance is not intended for use

by young children or infirmed persons
without supervision.

Young children should be supervised to
ensure they do not play with the appliance.

If the connecting cable for this

appliance is damaged, the cable must be
replaced by the manufacturer or his
customer service or a similarly qualified
person in order to prevent serious injury to
the user.

The appliance may be connected to the

mains by a qualified technician only.

Dispose of packaging materials

properly (see Installation instructions).

This extractor hood is designed for

domestic use only.

Light bulbs must always be fitted when

the extractor hood is in use.

Defective bulbs should be replaced

immediately to prevent the remaining bulbs
from overloading.

Never operate the extractor hood

without a grease filter.

Before using for the first time

9000.022 729.qxd  12.10.2006  9:34 Uhr  Seite 4

Summary of Contents for DHE 635 Series

















Reviews: