1 689 989 403
2019-03-01
|
Robert Bosch GmbH
1. Symbols used
1.1
In the documentation
1.1.1
Warning notices - Structure and meaning
Warning notices warn of dangers to the user or people
in the vicinity. Warning notices also indicate the con-
sequences of the hazard as well as preventive action.
Warning notices have the following structure:
Warning
symbol
KEY WORD – Nature and source of hazard!
Consequences of hazard in the event of fail-
ure to observe action and information given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observance:
Key word
Probability of
occurrence
Severity of danger if in-
structions not observed
DANGER
Immediate
impend-
ing
danger
Death
or
severe
injury
WARNING
Possible
impending
danger
Death
or
severe
injury
CAUTION
Possible
dangerous
situation
Minor
injury
1.1.2
Symbols in this documentation
Symbol Designation
Explanation
!
Attention
Warns about possible property damage.
i
Information
Practical hints and other
useful information.
1.
2.
Multi-step
operation
Instruction consisting of several steps.
e
One-step
operation
Instruction consisting of one step.
Intermediate
result
An instruction produces a visible inter-
mediate result.
"
Final result
There is a visible final result on com-
pletion of the instruction.
1.2
On the product
!
Observe all warning notices on products and ensure
they remain legible.
Disposal
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
Symbols used | Denoxtronic 1.1 | 19
en
2. User instructions
2.1
Important notes
You can find relevant information on the use of the
components in the separate ESI[tronic] repair instruc-
tions Denoxtronic 1.1 under the sections "Safety in-
structions", " Repair instructions " and "Lubricants and
auxiliary materials". These must be carefully studied
prior to start-up, connection and operation and must
always be heeded.
To check for leaks by means of pressurized gases, the
tester must be certified at least to DIN EN ISO 9712
Level 1.
2.2
Safety instructions
All safety instructions can be found in the separate
ESI[tronic] repair instructions Denoxtronic 1.1 in the
section "Safety instructions". These instructions should
be carefully studied prior to start-up, connection and
operation of the diagnostic device and must always be
heeded.
2.3
Intended use
The devices and components of tester set
0 986 610 551 are intended exclusively for test
and repair of the AdBlue-Fördermoduls of the type
Denoxtronic 1.1.
!
Nonobservance can lead to accidents and damage.
2.4
Training
Testing and repairs of the AdBlue supply module type
Denoxtronic 1.1 may only be performed by qualified
and trained personnel. We recommend user training in
testing and repair at the the AA training center.
Summary of Contents for Denoxtronic 1.1
Page 2: ......
