Typical system setup
1
8
2
4
3
9
8
8
6
6
6
6
5
8
8
8
7
6
5.1
5.2
Figure 3.1: Typical DCN multimedia system overview
A typical DCN multimedia conference system consists of:
1.
System server controller (PC):
–
The heart of the system. It licenses functionality, configures and controls the system.
2.
Client PC (optional):
–
Can be used to: Manage meetings, prepare meetings and configure the system.
3.
Audio Powering Switch (DCNM‑APS):
–
Controls the system audio, routes audio from and to the system and supplies power
to the devices.
4.
Powering Switch (DCNM‑PS):
–
Is used to increase the number of devices connected to the system.
5.
Conference multimedia devices (DCNM‑MMD):
–
Participants can use the multimedia device to make their contributions to a meeting.
–
5.1 is a DCNM‑MMD used for “system power on/off”. This DCNM‑MMD is always
connected to the powered socket of the DCNM‑APS or DCNM‑PS.
–
5.2 is a DCNM‑MMD used via “Power over Ethernet” (PoE) Ethernet switch.
6.
System Network Cable (DCNM‑CBxxx):
–
Connects DCN multimedia devices, audio powering switch and powering switch with
each other.
7.
Ethernet switch:
–
Ethernet switch with PoE on some ports. Routes the system data via Ethernet.
8.
CAT‑5e Ethernet cable (minimum requirement).
9.
Optional HD Conference Dome (VCD‑811-IWT) + external power supply:
–
Captures the image of a participant speaking.
3.1
DCN multimedia
System installation overview | en
7
Bosch Security Systems B.V.
Hardware Installation Manual
2013-08 | V1.0 |
Summary of Contents for DCN multimedia
Page 1: ...DCN multimedia Conference System en Hardware Installation Manual ...
Page 2: ......
Page 31: ......
