Bosch D1260 Series, Owner'S Manual

Page: 96 / 154

Part III: Advanced Commands
ADD/CHANGE USER (C 5 + 6)
D1260 Owner’s Manual
50410C © 2003 Bosch Security Systems
Add/Change Sub-User ID
For each user in the system, there can be up to four access cards; one Master User (assigned in the Card> prompt) and up
to three sub-users.
1. Pressing the Sub-User> soft key will allow you to
add/change a user’s Sub-User access card or credential.
2. The display changes to User 123 Add/Change Sub-User
IDs? to add or change any of this user’s sub-user IDs.
Pressing the Yes> soft key will jump to Step 3.
Pressing the No> soft key will jump to Add/Change
Passcode.
3. The display changes to Select Sub-User:
Press the <Sub-User 1 soft key to add or change sub-
user 1.
Press the <Sub-User 2 soft key to add or change sub-
user 2.
Press the <Sub-User 3 soft key to add or change sub-user 3.
Press the Exit> soft key to return to the main Add /
Change User display.
4. If adding or changing a
sub-user and a card
reader is connected to
your system, the
display changes to
Add
(or Change ) Sub-User
1: Present card to card
reader now.
If the display changes to D9210 not ready , contact
your security company.
If 20 seconds elapse without pressing a key the display
returns to idle text. Pressing the
<Exit soft key exits
out of this function and returns the display to the
main
Add / Change User display.
5. If the card you are trying to add to the system already
exists, an error tone sounds and the display changes to
Card already exists. Please try again.
If 20 seconds elapse without pressing a key returns the
display to idle text. Pressing the
<Exit soft key exits
out of this function and returns the display to the
main
Add / Change User display.
Then the display returns to Present card to card reader
now.
Present the card to the reader to continue or press the
<Exit soft key to exit out of this function and return
the display to idle text.