48
en
Care and daily cleaning
Cleaning the milk system
The milk system is automatically cleaned
with a short jet of steam directly after pre-
paring a milk drink.
F
Tip:
For particularly thorough clean-
ing, the milk system can be addi-
tionally rinsed with water (see the
section “Rinsing the milk system”).
Important:
Clean the milk system
manually every week and, if
required, also more often (see the
section “Cleaning the milk system
manually”).
B
Risk of burns!
The beverage outlet gets very hot.
After use, always let it cool down
before you touch it.
Rinsing the milk system
■
Touch
E
.
■
Touch
[ Rinse milk system ]
to select the
programme.
■
Open door and remove suction pipe from
the milk tube.
■
Wipe the suction pipe and insert the end
of the suction pipe into the hole on the
coffee grounds container.
■
Close the door. Be careful not to jam the
milk tube.
■
Place an empty glass underneath the
beverage outlet.
■
Press
C
.
The milk system is rinsed with water.
■
Then empty the glass.
■
Touch
E
to exit the programme.
Cleaning the milk system manually
Take the milk system apart to clean it:
■
Push the beverage outlet down com-
pletely and pull the cover forward to
remove.
■
Press the snap lever to the left of the
beverage outlet downwards and pull the
beverage outlet forward.
■
Remove the milk tube. Dismantle the top
and bottom sections of the beverage outlet.
■
Separate the milk tubes, connecting
element and suction pipe.
■
Clean the individual parts with a deter-
gent solution and a soft cloth.
