Imp
ort
Ap
plia
nce
s.c
om
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
en
Cleaning function
30
--------
Notes
■
Slight differences in colour on the front of the
appliance are caused by the use of different
materials, such as glass, plastic and metal.
■
Shadows on the door panels, which look like
streaks, are caused by reflections made by the
interior lighting.
Keeping the appliance clean
Always keep the appliance clean and remove dirt
immediately so that stubborn deposits of dirt do not
build up.
Tips
■
Clean the cooking compartment after each use. This
will ensure that dirt cannot be baked on.
■
Always remove flecks of limescale, grease, starch
and albumin (e.g. egg white) immediately.
■
Use the glass tray for baking very moist cakes.
■
Use suitable cookware for roasting, e.g. a roasting
dish.
.
Cleaning function
Cleaning function
Descaling
To ensure that your appliance continues to operate
correctly, it must be descaled regularly.
Caution!
■
Risk of damage to the appliance: Only use the
descaler recommended by us for descaling, either in
liquid or tablet form.The time the descaler needs to
be left to work depends on the product used.Other
descalers may damage the appliance. You can
order descaler from our after-sales service.
Liquid descaler: Order no. 311 680 Descaling
tablets: Order no. 311 846
■
Descaling solution: Do not allow any descaling
solution or descaler to come into contact with the
control panel or other surfaces on the appliance.
This may damage the surfaces. If this does happen,
remove the descaling solution immediately with
water.
Descaling consists of two steps.For hygiene reasons,
the descaling program must be run through completely
before the appliance is ready for operation again.
Descaling will take around 30 minutes in total.
■
Descale the appliance (29 minutes), then empty the
drip tray and fill the water tank with fresh water.
■
Run a rinse cycle after descaling the appliance
(approx. 1 minute), then empty the drip tray.
If descaling is interrupted (e.g. due to a power failure,
because the appliance is switched off or because the
descaling process is cancelled), you will be prompted
to run a rinse cycle once the appliance is switched back
on.The appliance cannot be used until the rinse cycle
comes to an end.
The frequency with which the appliance must be
descaled depends on the hardness of the water used.
When only five more steam-assisted operations are
possible (or fewer), the
Ê
symbol appears on the
appliance display, reminding you to descale it. You can
therefore prepare for the descaling in good time.
The steam mode is then only possible after the
descaling process has been completed.
Starting
1.
Use the function selector to select Descale
Ê
.
The duration of the descaling process will be
displayed.It cannot be changed.
2.
Open the tank cover.
3.
Remove and empty the drip tray.
4.
Slide the empty drip tray in fully.
5.
Remove the water tank.
6.
Mix water and descaler in accordance with the
instructions on the packaging to create a descaling
solution.
7.
Pour the descaling solution into the water tank and
slide the water tank in fully.
8.
Close the tank cover.
9.
Touch the start
l
stop button.
The appliance will now be descaled. The remaining
time counts down on the display. An audible signal
will sound once descaling has finished.The
appliance will be stopped.
Appliance interior
Inside of the door
and door seal
Hot soapy water:
Clean with a dishcloth.
Do not remove the door seal.
Do not scour.
Check the position of the door seal after cleaning
it.
Stainless-steel
surfaces
Hot soapy water:
Clean with a dishcloth.
Do not scour.
Check the position of the door seal after cleaning
it.
Accessories
Hot soapy water:
Soak and clean with a dish cloth or brush.
Drip tray and
water tank
Hot soapy water:
Clean with a dish cloth and rinse thoroughly with
clean water to remove residual detergent.
Dry with a soft cloth. Leave to dry with the lid
open. Rub the seal on the lid until dry.
Do not clean in the dishwasher.
Tank recess
Rub dry after every use.
Steam outlet in
cooking compart-
ment
Hot, soapy water: Use a cleaning sponge or a soft
washing-up brush.