Bosch CMA583MS0, Instruction Manual

Page: 19 / 68

Setting the time-setting options
en
19
O
Setting the time-setting
options
Setting the time-setting options
Your appliance has various time-setting options. You
can use the
0
touch field to call up the menu and
switch between the individual functions. The symbols for
the available functions light up in the display and the
function that you just selected is highlighted.
You can only call up the cooking time using the
0
field
after setting a type of heating. The timer can be set at
any time.
An audible signal sounds once the cooking time or
timer duration has elapsed. You can cancel the signal
early by touching the
0
field.
Note:
You can change how long the audible signal
sounds for in the basic settings.
~
"Basic settings"
on page 21
Checking the time settings
If several time-setting options are set, the
corresponding symbols light up in the display. The
cooking time starts counting down.
To check the timer
t
, cooking time
y
or time
0
, touch
0
repeatedly until the relevant symbol is highlighted.
During operation, only the timer and cooking time are
available. In standby, only the timer and time are
available. The value for this appears in the display for a
few seconds.
Setting the timer
You can use the timer as a kitchen timer. It runs
independently of the appliance. The timer has its own
audible signal. In this way, you can tell whether it is the
timer or a cooking time which has elapsed.
1.
Touch the
0
field.
The
t
symbol and the time symbols light up again.
2.
Use the rotary selector to set the timer duration.
After a few seconds, the time setting is adopted. The
timer starts. The
t
symbol lights up in the display and
the timer counts down. The other time symbols go out.
The timer duration has elapsed
An audible signal sounds.
‹‹
:
‹‹
is shown in the
display. Touch any field to switch off the timer.
Changing the timer duration
Use the rotary selector to change the timer duration.
The change is applied after a few seconds.
Cancelling the timer duration
Use the rotary selector to reset the timer duration
to
‹‹
:
‹‹
. The change is applied after a few seconds.
The timer is now switched off.
Setting a cooking time
You can set the cooking time for your food on the
appliance. Once the cooking time has elapsed, the
appliance will automatically switch itself off. The
cooking time cannot be accidentally exceeded.
Example in the picture: Hot air heating function, cooking
time of 45 minutes.
1.
Use the function selector to set the heating function.
A default value for the temperature is shown on the
display.
2.
Use the rotary selector to adjust the temperature if
necessary.
3.
Touch the
0
button twice.
- - : - - will be shown on the display and the time
symbols will be lit.
4.
Use the rotary selector to set a cooking time of 45
minutes.
5.
Touch the start
l
stop button.
The oven will start. The cooking time will count down on
the display and the start
l
stop LED will be lit.The other
time symbols will go out.
The cooking time has elapsed
An audible signal sounds. The appliance stops heating.
‹‹
:
‹‹
is shown in the display.
1.
Touch the
0
field.
The audible signal stops.
2.
Turn the function selector to the off position.
The appliance is switched off.
Time-setting option Use
t
Timer The timer functions like an egg timer. It runs
independently of the appliance when it is
heating and of other time-setting options and
does not affect the appliance.
y
Cooking time Once the set cooking time has elapsed, the
appliance automatically stops heating.
0
Time When no other function is running in the fore-
ground, the appliance shows you the time of
day in the display.