Bosch CMA583MS0, Instruction Manual

Page: 21 / 68

Basic settings
en
21
Q
Basic settings
Basic settings
There are various settings available to you in order to
help use your appliance effectively and simply. You can
change these settings as required.
Changing the basic settings
The appliance must be switched off.
1.
Touch the
0
button for a few seconds.
The first basic setting will appear on the display.
2.
Use the rotary selector to change the basic setting.
3.
Touch the
0
button.
The next basic setting will appear on the display.You
can go through all of the basic settings using the
0
button and make changes using the rotary
selector.
4.
Touch the
0
button for a few seconds.
This applies all the settings.
If the appliance is in standby mode, you can change the
settings at any time.
Cancelling
If you do not want to save the changes, turn the function
selector. The basic settings are ended without being
saved.
List of basic settings
Depending on the features of your appliance, not all
basic settings will be available.
Basic setting Options Explanation
™‹‚
Audible signal
duration
ƒ
= medium = 30
seconds
‚
= short = 10
seconds
„
= long = 2 min-
utes
Audible signal
sounds after a set
cooking time or
duration elapses or
when the timer
reaches zero
™‹ƒ
Audible signal but-
ton
‚
= On
‹
= Off Audible signal when
button is pressed
™‹„
Display brightness
ƒ
= medium
‚
= low
„
= high
Allows you to set the
display brightness
™‹…
Time display
‚
= On
‹
= Off Allows you to display
the clock time
™‹†
Interior lighting
‚
= On
‹
= Off Allows you to switch
the interior lighting
on or off
™‹‡
Factory setting
‹
= Off
‚
= On Appliance reset to
factory settings
™‹ˆ
Demo mode
‹
= Off
‚
= On Allows you to switch
demo mode on and
off
Note: Demo mode
is only visible in the
first 5 minutes after
connecting the appli-
ance to the mains.
™‹‰
Audible signal vol-
ume
ƒ
= medium
‚
= low
ƒ
= high
Setting the audible
signal volume