Bosch Climate 5000 AA Series, User Manual

Page: 12 / 16

1 2 | Bosch Split Type Ductless Air Conditioner / Heat Pump User Manual
01.2017 | Bosch Thermotechnology Corp. Data subject to change
4. Clean the large air fi lter with warm, soapy water. Be sure to use a mild
detergent.
Figure 8
5. Rinse the fi lter with fresh water, then shake off excess water.
6. Dry it in a cool, dry place, and refrain from exposing it to direct sunlight.
7. Close the front panel of the indoor unit.
4.3 Air Filter Reminders (Optional)
Air Filter Cleaning Reminder

After 240 hours of use, the display window on the indoor unit will flash
“CL.” This is a reminder to clean your filter. After 15 seconds, the unit will
revert to its previous display.

To reset the reminder, press the LED button on your remote control 4 times,
or press the MANUAL CONTROL button 3 times. If you don’t reset the
reminder, the “CL” indicator will flash again when you restart the unit.
Air Filter Replacement Reminder

After 2,880 hours of use, the display window on the indoor unit will flash
“nF.” This is a reminder to replace your filter. After 15 seconds, the unit will
revert to its previous display.

To reset the reminder, press the LED button on your remote control 4 times,
or press the MANUAL CONTROL button 3 times. If you don’t reset the
reminder, the “nF” indicator will flash again when you restart the unit.
Replacement Filters
Description
Bosch
Part Number
9000
BTU
12000
BTU
18000
BTU
24000
BTU
Air fi lter 7738005526 X X
Air fi lter 7738005615 X (2) X (2)
Air freshening fi lter 7738005555 X X X X
Table 2
Consult your local dealer for replacement fi lters.
4.4 Maintenance – Long Periods of Non-Use
If you plan not to use your air conditioner for an extended period of time, do the
following:
Turn on FAN function until
unit dries out completely
Turn off the unit and
disconnect the power Remove batteries
from remote control
Clean all filters
Figure 9
4.5 Maintenance – Pre-Season Inspection
After long periods of non-use, or before periods of frequent use, do the following:
Check for damaged wires Clean all filters
Check for leaks Replace batteries
Make sure nothing is blocking all air inlets and outlets
Figure 10