en
Time-setting options
12
timer has its own audible signal so that you can tell
whether it is the timer or a cooking time that has
elapsed.
Tip:
If you want the appliance to switch itself off after a
certain amount of time, use the cooking time.
Notes
¡
The timer duration always starts at 0 minutes.
¡
As you scroll through the values to set the duration,
they will increase by greater increments as they get
higher.
1.
Press .
a
The symbol will light up red.
2.
Use the control ring to set the timer duration.
3.
Press .
After a few seconds, the timer will start automatic-
ally.
a
The timer duration will then count down.
a
If you press when the appliance is in operation,
the timer duration will be displayed.
a
Once the set time has elapsed, an audible signal
will sound.
4.
Press the button to silence the audible signal be-
fore it is due to end.
Changing the timer
You can change the timer duration at any time.
1.
Press .
2.
Use the control ring to change the timer duration.
3.
Press to confirm.
Cancelling the timer
You can cancel the timer duration at any time.
1.
Press .
2.
Use the control ring to reset the timer duration to
zero.
3.
Press to confirm.
a
The red symbol will go out.
8.3 Setting the cooking time
Once the set cooking time has elapsed, the appliance
switches off automatically. You can only use the cook-
ing time in conjunction with a heating function. You can
set a cooking time of up to 23 hours and 59 minutes.
Requirement:
A heating function and a temperature
must have been set.
1.
Press .
a
The symbol will light up red.
2.
Use the control ring to set the cooking time.
The cooking time can be set in 1-minute increments
up to 1 hour, and then in 5-minute increments. The
end time is calculated automatically.
3.
Press to start.
a
The appliance will now start heating. The cooking
time will count down.
a
Once the cooking time has elapsed, an audible sig-
nal will sound. The time shown on the display will be
zero.
4.
Once the cooking time has elapsed:
‒
Press any touch key to silence the audible signal
before it is due to end.
‒
To set another cooking time, press and use
the control ring to set the cooking time.
‒
To continue without setting a cooking time, press
.
‒
When the food is ready, press to switch the
appliance off.
Notes
¡
When you start the Steam function , the cooking
time will not begin to count down until the set tem-
perature has been reached.
¡
If you open the appliance door while the Steam
function is in progress, the appliance will stop.
When you close the appliance door, the timer will
not resume its countdown until the appliance has
reached the set temperature again.
Changing the cooking time
You can change the cooking time at any time.
1.
Press .
2.
Use the control ring to change the cooking time.
3.
Press to confirm.
Cancelling the cooking time
You can cancel the cooking time at any time.
1.
Press .
2.
Use the control ring to reset the cooking time to
zero.
3.
Press to confirm.
To continue without setting a cooking time, press .
8.4 Setting the end time
You can delay the time at which cooking is due to fin-
ish by up to 23 hours and 59 minutes.
Notes
¡
In order to achieve good cooking results, do not
delay the end time once the appliance is already in
operation.
¡
Food will spoil if you leave it in the cooking com-
partment for too long.
Requirement:
The cooking time be set.
1.
Press again.
2.
Use the control ring to delay the end time.
3.
Use to start the operation.
a
The start time will appear on the display. The appli-
ance is in standby mode.
a
Once the start time has been reached, the appli-
ance will start heating and the cooking time will start
counting down.
a
Once the cooking time has elapsed, an audible sig-
nal will sound. The time shown on the display will be
zero.
4.
Once the cooking time has elapsed:
‒
To set cooking time again, press and use the
control ring to set the cooking time.
‒
To continue without setting a cooking time, press
.
‒
When the food is ready, use to switch the ap-
pliance off.
Changing the end time
In order to achieve good cooking results, only change
the set end time before the appliance starts heating
and before the cooking time starts counting down.
1.
Press to pause operation.
2.
Press twice.
3.
Use the control ring to change the end time.
