en |
19
7 620 210 013 | 10.2009
Robert Bosch Car Multimedia GmbH
en
Press the or button
9
to switch the
second video source on or off.
To exit the menu,
press the
MENU
button
:
.
Controlling video playback
To start the video playback,
press the
button
9
.
To stop the video playback,
press the
button
9
.
For fast searching forward or reverse (or
chapter skipping forward/reverse for DVD
playback)
press the or button
9
.
To return to the normal playback speed,
press the
button
9
.
Showing the map display (MAP)
If a navigation system and an RGB/FBAS
converter or a CLX monitor are connected to
the device, you can show the map display of
the navigation system on the monitors in the
cabin area.
To show or hide the map display,
press the
MAP
button
8
.
If the map display is shown, the display shows
the MAP symbol.
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Manually switching monitors on/off
(MON)
The monitors in the cabin area can be switched
on and off manually.
Press the
MON
button
<
.
The display shows "MON ON" or "MON OFF".
If the monitors are switched on, the MON
symbol is shown on the display. When you
switch off the monitors, the corresponding
relay switches off with a delay of approx. 4
seconds.
Selecting the video source for the
driver (CAM)
Connected cameras can be shown as video
source on a monitor in the cockpit (e.g. CLX).
These cameras can be used, for example, for
the rear view from the bus or for monitoring the
cabin area. In addition, a second video source
can be connected here, e.g. the map display of
a navigation system.
To display the camera and video images on the
cockpit monitor,
press the
CAM
button
7
.
To switch between different cameras and video
during the playback,
press the
CAM
button
7
once or several
times.
While the playback is active, the display shows
the CAM symbol.
Ñ
Ñ
Ñ
Source selection
02_CCA47_en_neu.indd 19
02_CCA47_en_neu.indd 19
09.10.2009 18:22:31 Uhr
09.10.2009 18:22:31 Uhr