26
en | Programming
Carephone 61
F.01U.239.30x | V1 | 2011.06
User Manual
Bosch Security Systems
6.2.5
Special key functions
Restore the programming steps to the factory settings
–
Press
P
and
R
together for at least two seconds.
The unit announces
"Setup reset"
and the language can be set.
Reset the Carephone 61
–
Press
R
for at least 1 second. The unit beeps and reboots.
Enter easy wireless transmitter registering on the keyboard
–
Press
P
,
9
and
1
together for at least 2 seconds.
–
The unit waits for a wireless signal.
–
Press the button of the wireless transmitter.
–
Press
C
to confirm.
The unit registers the wireless transmitter’s code in
Selection
91
(erasing the previous code) and returns to standby.
Enter easy unit ID programming
–
Press
P
,
3
and
0
together for at least 2 seconds.
–
The unit goes directly to
Programming Step 30
.
–
Type the unit ID (device number) with numeric keys, the
unit ID can be up to 12 digits long.
–
Press
C
to confirm.
Remote programming (incoming)
–
Press <Grey>, hold it, and within 2 seconds, press
<Red>
.
The device acknowledges by announcing
"Setup activated"
and
will now take the first incoming call for remote programming.
6.3
Test instructions
Make sure to perform a test regularly, by sending a manual test
alarm with the wireless transmitter. This will test the wireless
connection between the transmitter and the Carephone 61, and
will also test the connection of the Carephone 61 to the
monitoring center. This must be done at least once a week.
CAUTION!
This function deletes all user settings and restores the factory
settings!
