15
14
Remove the foam and micro-hygiene filter.
Place a new micro-hygiene filter and the foam in the
filter holder.
Insert the filter holder back into the vacuum cleaner
and click it into place.
Replacing the micro-hygiene filter
The motor protection filter should be changed when
starting a new pack of bags.
Open the dust bag compartment lid
Unlock the filter holder by pushing the locking tab in
the direction of the arrow.
Place a new MEGAfilt
®
SuperTEX dust bag in the holder
and close the dust bag compartment lid.
Caution: The cover only closes when a
MEGAfilt
®
SuperTEXdust bag has been inserted.
Cleaning the motor protection filter
The motor protection filter should be cleaned at
regular intervals by tapping it or washing it out.
Open the dust compartment cover.
Remove the motor protection filter in the direction of
the arrow.
Empty the motor protection filter by tapping it.
If the motor protection filter is very dirty, wash it out.
Leave the filter to dry for at least 24 hours.
After cleaning, insert the motor protection filter in the
machine and close the dust compartment cover.
Replacing the HEPA filter
If your vacuum cleaner is equipped with a HEPA filter, this
should be replaced once a year.
Open the dust bag compartment lid
Unlock the HEPA filter by pushing the locking tab in
the direction of the arrow and remove it from the
vacuum cleaner.
CLICK!
Insert the new HEPA filter and click it into place.
After vacuuming up fine dust particles, shake out
the motor protection filter to clean it and replace
the micro-hygiene filter, activated carbon filter or
HEPA filter if necessary.
