Bosch Recording Station Appliance
Maintenance | en
31
Bosch Security Systems
Hardware Installation Manual
- | V1 | 2011.10
5.
Push the new power supply module into the power bay until you hear a click.
6.
Plug the AC power cord back into the module and power up the system.
Replacing the Power Distributor
Redundant chassis that are 2U or greater require a power distributor. The power distributor
provides failover and power supply redundancy. In the unlikely event you must replace the
power distributor, do following
1.
Power down the system and remove the plug from the wall socket or power strip.
2.
Remove all cable connections to the power supply from the motherboard, backplane, and
other components. Also, remove both power supplies.
3.
Locate the power distributor between the power supply and the fan row.
4.
Remove the three screws securing the power supply.
5.
Gently pull the power distributor from the chassis. Gently guide all the cables through
the power distributor housing.
6.
Slide the new power distributor module into the power distributor housing. Make that
you slide the cables through the bottom of the housing.
7.
Reconnect all the power cables, replace the power supply, and insert the plug into the
wall.
Summary of Contents for BRS 19" 2U
Page 1: ...Bosch Recording Station Appliance en Hardware Installation Manual ...
Page 2: ......
Page 43: ......
