Bosch BRS 19" 2U, Hardware Installation Manual

Page: 3 / 44

Bosch Recording Station Appliance Table of Contents | en 3
Bosch Security Systems Hardware Installation Manual - | V1 | 2011.10
Table of Contents
1 Safety Precautions 5
1.1 General Safety Precautions 5
1.2 Electrical Safety Precautions 8
1.3 Important Notices 9
1.4 FCC & ICES compliance 9
1.5 EMC Compliance 10
1.6 ESD Precautions 10
1.7 Operating Precautions 11
2 System Overview 12
2.1 Introduction 12
2.2 BRS Tower 12
2.2.1 Control Panel Buttons/LEDs 13
2.3 BRS 19-inch 1U 15
2.3.1 Control Panel Buttons 15
2.3.2 Control Panel LEDs 16
2.3.3 Drive Carrier LEDs 16
2.3.4 Power Supply LEDs 16
2.3.5 Overheating 17
2.4 BRS 19-inch 2U 18
2.4.1 Control Panel Buttons 19
2.4.2 Control Panel LEDs 19
2.4.3 Drive Carrier LEDs 20
3 Maintenance 21
3.1 BRS 19-inch 1U 21
3.1.1 Removing the Chassis Cover 21
3.1.2 Removing/Replacing Hard Drives 22
3.1.3 System Fans 24
3.1.4 Power Supply 25
3.2 BRS 19-inch 2U 26
3.2.1 Removing the Chassis Cover 26
3.2.2 Removing/Replacing Hard Drives 27
3.2.3 System Fans 29
3.2.4 Power Supply 30
4 Rack Installation 32
4.1 Unpacking the System 32
4.2 Preparing for Setup 32
4.2.1 Choosing a Setup Location 32
4.2.2 Rack Precautions 32
4.2.3 General System Precautions 32
4.2.4 Rack Mounting Considerations 33
4.3 BRS 19-inch 1U - Rack Mounting Instructions 34
4.3.1 Identifying the Sections of the Rack Rails 34
4.3.2 Inner Rails/Inner Rail Extensions 35