20
en
Home Connect
Switching Wi-Fi on and off
Wi-Fi can be switched
“Activated”
or
“ Deactivated”
as required (e.g. when on
holiday).
Note:
Network information is retained after the
appliance is switched off. After switching on,
wait a few seconds until the fully automatic
coffee machine has connected to the WLAN
network again. In networked standby mode
the appliance requires a maximum of 2 W.
■
Touch
A
to open the menu.
■
Touch
[ Home Connect ]
.
■
Touch
[ Wi-Fi ]
to switch the wireless
module
“Activated”
and
“Deactivated”
.
Disconnecting
The fully automatic coffee machine can be
disconnected from the WLAN network at
any time.
Note:
If the fully automatic coffee machine is
disconnected from the WLAN network, it
cannot be operated using Home Connect.
■
Touch
A
to open the menu.
■
Touch
[ Home Connect ]
.
■
Touch
[ Disconnect from network ]
.
The connection to the network and app is
disconnected. Wi-Fi and remote start are
switched off.
Note:
Information about the WLAN network is
cleared.
Connecting with app
The Home Connect app can be installed on
any number of mobile devices, which can
then be used to connect to the fully auto-
matic coffee machine.
The fully automatic coffee machine must
already be connected to the WLAN network.
■
Open the app on the mobile device.
■
Touch
A
to open the menu.
■
Touch
[ Home Connect ]
.
■
Touch
[ Connect to app ]
to connect to the
appliance with the app.
Remote start
If you wish e.g. to start drinks dispensing
on the fully automatic coffee machine via
a mobile device, Remote start must be
activated.
¡
CAUTION
Risk of burns!
If an unattended remote start takes place,
third parties might be scalded if they
reach under the coffee dispenser during
drinks dispensing. You should therefore
make sure that with an unattended
remote start that there is no risk to other
people, in particular not to children, or to
property.
Note:
The
[ Remote start ]
text field is is only
visible if connection with Home Connect
has been successfully completed.
Note:
If Remote start is switched off, only the
modes of the fully automatic coffee machine
are displayed in the Home Connect app.
■
Touch
A
to open the menu.
■
Touch
[ Home Connect ]
.
■
Touch
[ Remote start ]
to switch the
function Remote start
“Activated”
and
“Deactivated”
.
Device Info
Display for network and device information
■
Touch
A
to open the menu.
■
Touch
[ Home Connect ]
.
■
Touch
[ Device info ]
. The SSID, IP, MAC
address and serial number of the appli-
ance are displayed for a few seconds.
