3
de
en
Inbetriebnahme
Zusammenstellen
»ELECTROMATIC PLUS«-Bürste wie eine
Saugdüse aufstecken. Anschlußkabel
(2)
in die
Gerätesteckdose des Staubsaugers stecken
(Abb. 1).
Mit dem Einschalten des Staubsaugers schaltet
sich die »ELECTROMATIC PLUS«-Bürste ein.
Wartung
Blockiert beim Arbeiten die Bürstenwalze durch
Aufsaugen sperriger Fremdkörper oder durch
umwickelte Teppichfransen, schaltet sich der
Motor automatisch ab.
Vor jeder Wartung Staubsauger ausschalten und
Gerätenetzstecker ziehen.
Die »ELECTROMATIC PLUS«-Bürste schaltet
sich wieder ein ,wenn der Blockadegrund besei-
tigt, 1 Minute Wartezeit berücksichtigt und die
Stromversorgung erneut hergestellt wurde.
Entfernen von
aufgewickelten Fäden
Aufgewickelte Fäden und Haare können Sie
leicht von der Bürstenwalze entfernen, indem
Sie die Fäden mit einer Schere durchschneiden
(Abb. 3)
und mit der Fugendüse absaugen
(Abb. 4).
Our contribution to protecting our environ-
ment. We use recycled paper.
Disposal instructions
Dear Customer,
We want our products to come to you in the
same perfect condition as we dispatch them.
That is why we place them in effective packa-
ging for their long journey.
The packaging is all made of environment fri-
endly materials that should be recycled for use
as valuable secondary raw materials. The carton
can be deposited in the waste paper container.
The foils are made of polyethylene (PE). The
address of the nearest recycling centre is avai-
lable from your local authority. When they reach
the end of their service lives, machines should
also be deposited at a recycling centre since
they contain valuable materials that should be
recycled.
Information for your safety
Please read the information contained in the fol-
lowing carefully. It contains important instruc-
tions for your safety and how to use and service
the brush.
Keep this operating manual in a safe place and
pass it on to the next owner if you sell the
machine.
The brush complies with the acknowledged
rules of technology and the relevant safety
regulations. The brush may only be used for
vacuuming dry materials. Do not use the brush
to vacuum people or animals. The manufacturer
cannot accept liability for any damage caused
by improper usage or incorrect operation.
Read and observe the following instructions:
- Dispose of the packaging material correctly.
- Do not use the brush if it is damaged.
- To ensure safe operation, only fit the brush
as set out in the operating manual and con
nect and operate it as set out on the model
plate.
- In the event of a defect, disconnect the
brush from the machine (pull out the plug).
- Only have repairs, spare parts replacements
and work on the brush carried out by a
trained specialist or our after-sales service
department.
- Immediately make brushes that have
reached the end of their service life useless
and then send them for proper recycling.
- Only allow children to operate electrical
appliances under supervision.
- Do not vacuum any sharp, pointed, hot or
5100 401 262 A 02.04.2013 14:25 Uhr Seite 3
