BAT 135 | REV. A | JANUARY 2018
Operating Instructions
|
BAT 135 Battery Tester
| 11 | en
Bad & Replace
The battery will not hold a charge. It should be replaced immediately.
Bad Cell & Replace
The battery has at least one cell short circuit. It should be replaced immediately.
Load Error
The tested battery is bigger than 2000SAE or 200AH. Or the clamps are not connected properly. Please fully
charge the battery and retest after excluding both previous reasons. If reading is the same, the battery should be
replaced immediately.
4. Press ENTER to get a test code for record.
Note: A BARCODE will appear after printing. Pay attention to the BARCODE Scanner, which only supports
CODE39 format. See
Appendix C, Generating Test Codes.
5. Press to select result printing: YES or NO. Press ENTER to confirm your choice.
6. Press ENTER to return to Step 5, or remove the test clamps from the battery posts after completion of testing
batteries to end test.
