© 2015 Bosch Security Systems, Inc.
F.01U.282.233 | 05 | 2015.05
en
Installation Guide
Conettix Plug-in CDMA
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, NY 14450
USA
www.boschsecurity.com
Cellular Communicator
B441
Bosch Sicherheitssysteme
GmbH
Robert-Bosch-Ring 5
85630 Grasbrunn
Germany
6 | Specifi cations
Region
Agency
Certifi cation
US
FCC
FCC, Part 15 Class B Radiated/Conducted Emissions
Verizon
Open Development Certifi ed
UL
UL 365 - Police Station Connected Burglar Alarm Units and
Systems
UL 636 - Holdup Alarm Units and Systems
UL 864 - Control Units and Accessories for Fire Alarm Systems
UL 985 - Household Fire Warning System Units
UL 1023 - Household Burglar-Alarm System Units
UL 1076 - Proprietary Burglar Alarm Units and Systems
UL 1610 - Central-Station Burglar-Alarm Units
Dimensions
2 in x 3.68 in x 0.60 in (50 mm x 93.5 mm x 15.25 mm)
Voltage (operating)
12 V nominal
Standby current
35 mA
Alarm current
100 mA
Operating temperature
0°C to +49°C (+32°F to +120°F)
Relative humidity
Up to to 93% non-condensing
Cellular compatibility
CDMA2000
1xRTT
Included antenna
– Magnetic base omni-directional antenna
– 2.5 m (8.2 ft) cable with SMA connector
Compatibility Control
Panels
B9512G/B9512G-E/B8512G/B8512G-E
B5512/B5512E, B4512/B4512E, B3512/B3512E
The B441 is compatible with most Bosch control panels when
used with a B450 Conettix Plug-in Communicator Interface.
Refer to the
Conettix Plug-in Communicator Interface (B450)
Installation and Operation Guide
for complete control panel
compatibility listings.
Copyright
This document is the intellectual property of Bosch Security Systems, Inc. and is protected by
copyright. All rights reserved.
Trademarks
All hardware and software product names used in this document are likely to be registered
trademarks and must be treated accordingly.
Bosch Security Systems, Inc. product manufacturing dates
Use the serial number located on the product label and refer to the Bosch Security Systems, Inc.
website at
http://www.boschsecurity.com/datecodes/.
Use Remote Programming Software (RPS) or
an SDI2 keypad to program the control panel to
use the module for communication.
For programming parameter descriptions,
options, and defaults refer to
RPS Help
or the
Program Entry Guide
for your control panel.
For Bosch Cellular account status and
management, use RPS or the online service
portal (go to http://www.conettix.com/
Cellular.aspx and click on the
Cellular Portal
Login
link).
5 | Certifi cations
Flash pattern
Function
Red
Indicates an
unacceptable signal
strength level.
Yellow
Indicates a marginal
signal strength level.
Green (1 light)
Indicates a good
signal strength level.
Green (2 lights)
Indicates a very good
signal strength level.
Table 3.1: Signal strength LEDs description
Flash pattern
Function
Flashes once ev-
ery 1 sec (blue)
Normal State: Indicates
normal operation.
ON Steady (blue)
Communication Error
State: Indicates the
module is unable to
communicate on the
cellular network.
OFF Steady
LED Trouble State:
Module is not powered,
or some other trouble
condition prohibits
the module from
controlling the STATUS
LED. (Check for proper
installation.)
Table 3.2: STATUS LED descriptions
4 | Confi guration
