5
Bus Type, Address Selection and Function
Set the address switch to the correct position for the control panel SDI or Option Bus address using table 1
below.
Address Switch
Position
Bus/Address
Compatible Control Panels
Operation
0
SDI: Address Selected in
Browser
Select Panel address using web browser
Determined by panel address selected
1
SDI 2: 1
GV4 & B-Series
Remote Programming, Reporting or Automation
2
SDI 2: 2
GV4 & B-Series
Remote Programming, Reporting or Automation
3
SDI: 80
GV4 Series, G – GV3 and any with firmware
version 6.0+
Automation
4
SDI: 88
GV4 Series, G – GV3 and any with firmware
version 6.0+
Remote Programming, or Reporting
5
SDI: 92
GV4 Series, GV3 Series
Remote Programming, or Reporting
6
Option Bus: 134
FPD-7024, D7240v2, D7220v2, Easy Series 3+
Reporting only
7
Option Bus: 13
DS7400xi
Remote Programming, or Reporting
8
Option Bus: 14
DS7400xi
Reporting
9
Option Bus: 250
FPD-7024
Remote Programming, or Reporting
Table 1 Panel Compatibility & Address Selection
Maintenance and troubleshooting LEDs
Use the Heartbeat (system status), RX (receive) and TX (transmit) LEDs to assist with troubleshooting:
Flash pattern
Function
Flashes once every 1 sec
Normal state. Indicates normal operation state.
3 quick flashes every 1 sec
Communication error state. Indicates a bus communication
error. The module is not receiving commands from the control
panel.
On Steady
Trouble state. Indicates a trouble condition exists.
Off
LED trouble state. Module is not powered, or some other trouble
condition prohibits the module from controlling the heartbeat
LED.
Table 2 Heartbeat LED descriptions
