33
̈
Adjust the furniture door using the threaded rod
(Torx screwdriver). Re-examine the dimensions
of the crack continuously.
̈
Close the door and check that the depth of the furniture
front is aligned with the adjacent fronts.
If required, correct.
̈
Tighten the bracket screws to fix the depth alignment.
̈
Close the door and check the side alignment. Correct
by gently tapping the edge of the open furniture door
with your hand.
̈
Tighten the nuts on the adjusting rail. This will fix the side
alignment of the door.
26. Attaching the furniture door
(freezer compartment)
̈
Remove fixing bracket from one side of the drawer.
To do this, loosen the fastening screws only.
̈
Loosen fixing bracket on the other side of the drawer
and pull slightly off the appliance door.
To do this, loosen the fastening screws only.
̈
Open drawer.
̈
Hang the furniture door with adjusting rail over the
double threaded bolts.
̈
Raise furniture door slightly and push the fixing plates
down over the fixing brackets on the drawer.
̈
Insert removed fixing brackets into the fixing plates and
push over the fastening screws.
̈
Screw the nuts a little onto the double threaded bolts.
Do not tighten!
NOTE
Now fit the furniture handles which are screwed from
behind!
