30
̈
Using the positioning aid, set both longitudinal sides of
the furniture door parallel.
̈
Using a square, extend the drill hole marks which you
have just made to the vertical marks.
̈
Mark and drill the holes.
̈
Screw on the fixing plates (10x).
23. Attaching the adjusting rail to
the furniture door
(freezer compartment)
̈
Measure the distance
X
between the adjusting rail and
the overhead furniture/fixtures.
̈
Loosen the 2 nuts and remove the adjusting rail.
̈
Mark this amount
X
on the rear of the furniture door.
̈
Determine and mark the centerline of the furniture door.
̈
Put on the adjusting rail and align along the marks.
Mark the drill holes.
̈
Drill the holes.
̈
Screw on the adjusting rail tightly.
