10
Installing the handles
Do not install the handles until the
appliance is installed in its designated
location and is level
.
All of the handles are identical
.
The appliance comes
w
ith t
w
o sheets
of protective film that are used
w
hen
installing and removing the handles
.
They can be used multiple times
.
The sheets of protective film protect
the surface of the appliance
w
hen
installing and removing the handles
.
NOTICE
If the handles are installed incorrectly,
they
w
ill not move in the right
direction
.
To install the handles correctly:
It must be possible to push do
w
n on
the handles for the refrigerator
compartment doors
.
It must be possible to push the
freezer compartment dra
w
er handle
to the right
.
1
.
Place the protective film on the
appliance
.
2
.
Insert the refrigerator door handles
into the guides
.
3
.
Push do
w
n on the handles until
they loc
k
into place
.
4
.
Insert the freezer compartment
dra
w
er handle into the guides
.
5
.
Push the handle to the right until it
loc
k
s into place
.
6
.
Remove the protective film
.
Removing the handles
1
.
Placement of the protective film:
S
Above the guides on the
refrigerator doors
.
S
To the left of the guides on the
freezer compartment dra
w
er
.
2
.
Push do
w
n on the refrigerator
compartment door handles and
remove
.
3
.
Push the freezer compartment
dra
w
er handle to the left and
remove
.
4
.
Remove the protective film
.
Save
the protective film for future use
.
Installing the base plate
1
.
Remove the three scre
w
s on the
appliance
.
2
.
Mount the base plate
.
3
.
Insert the three scre
w
s and tighten
.
en
