Bosch AVENAR 4000 FAH-425-T-R, Operation Manual

Page: 12 / 38

Mode Terminal connection Alarm condition
1
+
The remote indicator shows steady red light. Current has
to be limited to max. 30 mA.
2
+
The remote indicator shows steady red light. Input voltage
range: 8.5 V DC … 33 V DC. Constant current consumption
13 mA.
3
+
The remote indicator shows flashing red light. Input voltage
range: 11 V DC … 33 V DC. Constant current consumption
3 mA.
Operate in mode 1 and 3 only, when connected to LSN detectors.
1.
Place the cap on the base plate in such a way that the two hooks are inserted into the
slits.
2. Press the cap lightly onto the base plate until the snap‑fit‑hook engages.
Notice!
Malfunction
The cable length between the detector and the remote indicator must not exceed 3 m when
connected by an unshielded cable.
Technical specifications
FAA‑420‑RI‑ROW FAA‑420‑RI‑DIN
Operating Voltage 5 ‑ 30 V DC 9 ‑ 30 V DC
Maximum current
consumption 20 mA Mode 1: limited to 30 mA
Mode 2: 13 mA
Mode 3 : 3 mA
Permissible wire gauge 0,6 – 2 mm 0,6 ‑ 0,8 mm
Display medium 1 LED 2 LED
Dimensions 85 x 85 x 28 mm 85 x 85 x 35 mm
Weight 45 g 65 g
12 en | System Overview AVENAR detector 4000
2014.11 | 1.1 | F.01U.283.550 Operation Guide Bosch Sicherheitssysteme GmbH