AUTODOME IP starlight 5100i IR
Introduction | en
11
Bosch Security Systems
Installation Manual
2021-02-19 | 0.7 |
2
Introduction
–
This equipment should be unpacked and handled with care. Check the exterior of the
packaging for visible damage. If an item appears to have been damaged in shipment,
notify the shipper immediately.
–
Verify that all the parts listed in the Parts List below are included. If any items are
missing, notify your Sales or Customer Service Representative from Bosch Security
Systems.
–
Do not use this product if any component appears to be damaged. Please contact Bosch
Security Systems in the event of damaged goods.
–
The original packing carton (if undamaged) is the safest container in which to transport
the unit and must be used if returning the unit for service. Save it for possible future use.
2.1
Parts List
Quantity
Component
1
AUTODOME IP starlight 5100i IR camera
1
Screwdriver, T15 Torx
4
MAC address labels
1
Pendant interface plate
2
M4 screw
1
IP66 kit
1
PE foam
1
3/16” Allen key (Hex key)
1
Quick Installation Guide
1
Safety instructions
2.2
Additional Products Required
Quantity
Item
100 m
maximum
Ethernet cable (Cat5e or better)
*
Power cable (24 VAC)
*
Alarm wiring as needed
*
Audio wiring as needed
1
microSD card (maximum 32 GB (microSDHC) / 2 TB (microSDXC)) (user-
supplied)
* Refer to the chapter Preparing Wiring.
2.3
Additional tools required
The table that follows is a list of additional tools (not supplied by Bosch) required to install an
AUTODOME camera or its accessories:
