24
en | Installing an In-Ceiling Camera in a Drywall Ceiling
AUTODOME IP starlight 5000i
2020-07 | 1.3 |
Installation Manual
Bosch Security Systems
3×
4.
Tighten the clamps using the Phillips screwdriver to secure the housing to the ceiling.
!
Warning!
Over torquing the ceiling clamps can damage the clamp or ceiling. Only tighten the clamp
until it contacts the ceiling and you start to feel some resistance. If using a power
screwdriver, set the torque level to the lowest setting.
5.
Place the trim ring / bubble enclosure in position over the camera block, aligning the
three (3) screws. Tighten the screws firmly to secure the trim ring / bubble enclosure to
the in-ceiling bracket.