AUTODOME IP starlight 5000i
Preparing the Camera | en
13
Bosch Security Systems
Installation Manual
2020-07 | 1.3 |
5
Preparing the Camera
Note
: For pendant models, use T15.
For in-ceiling models, use T10.
1.
Loosen the three (3) Hex screws in the trim ring / bubble enclosure with the appropriate
Torx screwdriver.
2.
Remove the trim ring / bubble enclosure.
3.
Remove the foam insert that protects the camera block.
4.
Remove the tape holding the plastic lens protector; remove the lens protector.
2.
3.
4.
5.
1.
3×
T10
