AutoDome Easy II IP
Using the AutoDome Easy II IP | en
85
Bosch Security Systems, Inc.
Installation Manual
F.01U.164.576 | 2.0 | 2010.03
11.6
Saving Snapshots
You can save individual images from the video sequence
currently shown on the
LIVEPAGE
in JPEG format on your
computer's hard drive. The icon for recording single images is
only visible if the unit is configured to enable this process.
Click the icon. The image is saved at a resolution of
704 × 576 pixels (4CIF). The storage location depends on
the configuration of the .
11.7
Recording Video Sequences
You can save sections of the video sequence currently shown
on the
LIVEPAGE
on your computer's hard drive. The icon for
recording video sequences is only visible if the unit is
configured to enable this process.
1.
Click the icon to start recording. The storage location
depends on the configuration of the AutoDome Easy II IP. A
red dot in the icon indicates that recording is in progress.
2.
Click the icon again to stop recording.
Image Resolution
Sequences are saved at the resolution that has been preset in
the configuration for the encoder (see
Section 12.4 Basic Mode:
Encoder Profile, page 90
).
NOTICE!
You can play back saved video sequences using the Player from
Bosch Security Systems, which can be installed from the
product CD supplied.
Summary of Contents for AutoDome Easy II IP
Page 1: ...AutoDome Easy II IP VEZ Series en Installation Manual ...
Page 2: ......
Page 143: ......
