Bosch AMAX panel 4000 Quick Start Manual Download Page 32

Page: 32 / 72

Force Arm / Bypass

Disabled

Force Arm

Bypass

All

Silent Alarm / Chime
Mode

Disabled

Silent Alarm

Chime Mode

All

Zone Pulse count

Disabled

1-9

1-9 Pulses

Zone Lockout

Disabled

1 Times Alarm Lockout

3 Times Alarm Lockout

6 Times Alarm Lockout

Alarm Duration

Zone Tamper (DEOL)

Disabled

Enabled

Zone Status Report

No Report Required

Receiver 1

Receiver 2

Receiver 3

Receiver 4

Receiver 1, 2, 3 and 4

Receiver 1 (2, 3 and 4 for backup)

Receiver 1 (2 for backup) and Receiver 3 (4 for backup)

Unverified Alarm
Report / Cross Zone

Disabled

Unverified Alarm Report

Cross Zone

All

Domestic Call

Follow 'Alarm report' Option's Logic. Range 0-7

No Reports Allowed

Report to Destination 1

Report to Destination 2

Report to Destination 3

en | Configuration

AMAX panel 4000 / AMAX panel 4000

2013.07 | 03 | F.01U.267.113

Quick Start Guide

Bosch Sicherheitssysteme GmbH

Summary of Contents for AMAX panel 4000









































































Search results

Summary of Contents for AMAX panel 4000

Reviews:

Related manuals for AMAX panel 4000

Brands by name

Popular brands

Bosch AMAX panel 4000, Quick Start Manual

Search results

Summary of Contents for AMAX panel 4000

Reviews:

Related manuals for AMAX panel 4000

Brands by name

Popular brands