ACS 753, ACS 763, ACS 863 Service Manual
SP00D00609
2018-03-26
Robert Bosch GmbH
17
Introduction
18. Select
ESC
icon to return to the Mainte-
nance Menu.
CAUTION: To prevent personal injury,
do NOT operate the machine at any
other time without the oil fill port
cap installed, because the vacuum
pump is pressurized during normal
operation
.
NOTE:
Review the laws and regulations in your
jurisdiction to determine correct disposal proce-
dures for pump oil. It is the responsibility of the
user to determine if a material is a hazardous
waste at the time of disposal. The user must
ensure compliance with all applicable laws and
regulations.
1
3
2
Figure 1-7. Oil Ports
Edit Print Header
To make changes to the printer text (available
in Setting menu) appearing in the header on
each printout:
1. Call up the Main Menu.
2. Select
NEXT
icon.
3. Select
MENU
icon.
4. Select
Edit Print Header
in the Settings
Menu. The cursor is in the first field.
5.
Update the text by using the arrows and the
multi-tap interface on the numeric keypad:
• BACKSPACE
icon acts as a backspace
key.
• Right
or
left
arrow moves the cursor to the
right or to the left.
• Zero
(0) key also acts as a spacebar.
• Up
and
Down
arrows navigate between
the rows.
6. Select
OK
icon to save the changes and
return to the Settings Menu.
7. Select
ESC
icon to exit and return to the
Settings Menu.
Replace Printer Paper
To install a new paper roll in the printer:
1. Remove the cover on the printer by pulling
out on the tab (2) as shown in Figure 1-8.
2. Remove the paper core.
3. Install the new roll of paper with the end of
the paper at the top of the roll.
4. Assemble the cover onto the printer with the
leading edge of the paper over the roller (1).
1
2
Figure 1-8. Replace Print Paper
