Technical data
23
EasyControl Adapter – 6720884375 (2019/0
7
)
7
Technical data
Table 2
Technical data, module
Table 3
Technical data, connections
Table 4
Technical data, volt free contact, DC load
Table 5
Technical data, volt free contact, AC load
Table 6
Technical Data, power source
8
Faults
Table 7
Malfunctions
Volume
Unit
Value
Voltage supply
V
DC
20
P
max
W
3
P
max out
(EMS)
W
2.25
Dimensions
(width x height x depth)
mm
134 × 115 × 37
Weight
g
230
Permissible ambient
temperature range
°C
0 - 50
Max. storage temperature
°C
0 - 60
Permissible relative humidity
(dry mode)
%
10 - 90
IP classification
IP20
Volume
Unit
Value
Cable diameter (min.)
mm
2
0.2
Cable diameter (max.)
mm
2
2.5
Cable length (max.) EasyControl
adaptor - boiler
m
3
Cable length (max.) EasyControl
adaptor - thermostat
m
100
Volume
Unit
Value
Switching voltage DC (maximum)
V
250
Switching current DC (minimum)
mA
10
Switching current DC (maximum)
A
3
Contact load DC (maximum)
W
72
Volume
Unit
Value
Switching voltage AC (maximum)
V
250
Switching current AC (maximum)
A
5
Contact load AC (maximum)
VA
1250
Volume
Unit
Value
Power supply AC in
V
100 - 240
Frequency
Hz
50 - 60
Contact load (maximum) @ 240 V
AC
A
0,32
Power supply DC out
V
20
Contact load (maximum) @ 20 V
DC
mA
300
LED
Error
Solution
Blinking
alternating red
and blue
No boiler detected. ▶ Turn on the boiler.
▶ Check the cable clamps between the power adaptor and the connection to the boiler.
▶ Check the 2-wire cable.
▶ Refer to the boiler installation instructions.
Constantly red
Short circuit
connection to the
thermostat.
No communication
with the boiler.
The boiler is turned off:
▶ Turn on the boiler.
▶ Check all connections.
The boiler is switched on:
▶ Remove the EasyControl adaptor power adaptor from the socket, wait at least
10 seconds, and reconnect it.
Constantly blue
No communication
with the
thermostat.
▶ Turn on the boiler.
▶ Check the cable clamps between the power adaptor and the thermostat.
▶ Check the 2-wire cable to the thermostat.
Out
No power.
▶ Connect the EasyControl adaptor power supply.
▶ Replace the power adaptor.
